Parts and Accessories

• External Alarm and Switch for WatchMate XB-8000
• Easy panel mounting
• Steady continuous or pulsing tone
• Adjustable volume control
• Connects directly to any WatchMate XB-8000 - no relay required
• Waterproof, robust and attractive stainless steel switch design
• Blue LED switch illumination

H1 Handset Bulkhead Connector includes a mounting base, cover, waterproof cap and power cable. Connect the bulkhead connector to 12V or 24V DC.

2.4GHz Wifi Antenna connects externally by SMA connector to the Cortex Hub. The External Wifi Antenna offers increased range over the internal antenna.

NMEA 2000 T-Connector connects along the NMEA 2000 network backbone to provide a drop point for the Cortex Hub (V1 & M1).

The 2m (6ft) NMEA 2000 Drop Cable connects an NMEA 2000 device to an NMEA 2000 network.

Cortex Hub Power Cable is 2m (6ft) corrosion resistant marine tinned cable. The locking connector provides a secure connection to the Cortex Hub.

This VHF Patch Cable is 2m (6ft) and connects the Cortex Hub Auxiliary VHF port (BNC) (labelled Splitter) to an external VHF Radio antenna port (PL259). This cable allows an external VHF to operate through Cortex’s integrated AIS / VHF splitter.

The 5m (16ft) Cellular Patch Cable is a high performance low loss cable with a Male SMA to connect to the Cortex External Cellular Antenna and a Female SMA to connect to the Cortex M1 smartAIS’ Cellular Antenna Port (labelled Cloud).

The GPS Antenna Patch Cable is a 10m (32ft) long, high performance low loss cable with Male SMA to both the External GPS Antenna and the Cortex Hub (V1 & M1).

External Cellular Antenna connects using the Cellular Antenna Patch Cable (included) to the Cortex Hub (V1 & M1), offering enhanced range over the internal cellular antenna.

Multi-constellation external GNSS Antenna for the Cortex Hub (V1 & M1). IP67 and UV stable for use in harsh marine environments. Supplied with 10m (33ft) patch cable.

Railblaza Cradle Adapter fits to the rear of either the H1 Cradle or the H1P Charging Cradle allowing a Railblaza StarPort attachment to be connected.

The External Weatherproof Speaker is compact in size and designed for the marine environment with an IP66 ingress protection and is suitable for mounting almost anywhere on board.

• External Mute Switch for WatchMate transponders
• Waterproof, robust and attractive stainless steel design
• Easy panel mounting and wiring
• Blue LED illumination

• Loud alarm for WatchMate 670,750,850, Vision and XB-8000.
• Easy panel mounting
• Steady continuous or pulsing tone
• Adjustable volume control
• Connects directly to any WatchMate or XB-8000 - no relay required

This kit allows you to easily extend the GPS antenna cable for a WatchMate Vision, XB-8000 or XB-6000. It includes a 10m (33') cable with SMA connectors on both ends, an SMA joiner to go between the two cables, and adhesive lined shrink wrap to seal and waterproof the connection.

• For use with AIS VHF antenna splitter
• Has PL259 connectors
• 2m (6.5ft) long

• For use with AIS VHF antenna splitter
• BNC connector and Motorola plug
• 2m (6.5ft) long

• For use with AISWatchMate 850, AISWatchMate Vision and XB-8000 transponders
• Fully waterproof
• Twist lock ensures a secure connection that won't fall out due to vibration or shock
• 5m (16ft) long

• For use with all Vesper Marine AIS transponders, receivers or displays
• 2m (6.5ft) replacement power cable

• For use with Vesper Marine AIS WatchMate 650/670/750/850
• Replacement mounting bracket

• For use with Vesper Marine AIS WatchMate 650/670/750/850 and WatchMate Vision
• Replacement thumbscrews with vibration dampeners